Laboratory Universal Heating Oven

Laboratory Universal Heating Oven

Laboratory Universal heating oven
Forced air circulation oven used for drying
Air exchange rates and air flap position is controlled electronically at the Controller.
Easy programming of temperature and air exchange rates with the software.
Sufficient Inlet and outlet openings in order to increase air exchange to reduced drying times
Controllable ventilation speed for various applications.
Fresh air is fed through a pre-heating chamber and introduced into the working chamber to prevent temperature deviations.
Material and Construction
Interior:
Stainless steel, material (ASTM 304), with all-round deep-drawn ribs to integrate the large-area heating with ceramic-metal sheath
Gastight interior
Volume: 250-270/9.0 L
Width: 630-660 mm
Height: 750-850 mm
Depth: 450-550 mm (less 40 mm/1.6 in for fan)
Number of Stainless steel grids: 9
Max. load per grid: 25-35 kg
Max. load of chamber: 250-350kg
Exterior/Housing: Textured stainless steel, rear zinc-plated steel, intuitively operated single display
Width: 800-850 mm
Height: 1150-1200 mm
Depth: 650-700 mm
Net weight: 80 to 110kg
Fresh air: Admixture of pre-heated fresh air by electronically adjustable air flap
Working-temperature range: at least 5°C above ambient temperature to +300°C
Setting temperature range: +20 to +300 °C
Setting accuracy: up to 99.9 °C: 0.1 / from 100 °C: 0.5"
Configuration
Forced air circulation oven with USB and LAN Interfaces.
Full-sight glass door (4 insulating glass),
Fresh-air filter (filtration efficiency 80 %) mounted at the bottom.
Interior lighting (10 to 20 W),
Gas inlet/outlet through 2 tubes with ball valves.Entry port, 20 to 25 mm clear diameter, for introducing connections at the side is closed by flap at left centre top,
Entry port 50 to 65 mm clear diameter is closed by flap at the back centre top.
Current loop interface (0 to +310 °C, 4 – 20 mA):
Temperature controller actual value
Temperature of a Pt100 sensor positioned flexibly in chamber
Accessories
Stainless steel slide-in drip tray, 12 to 20 mm rim.
Ambient operating temperature 4–55 °C
Humidity < 80 %
Electrical 220 ±10 ACV, 50 Hz